Buick Encore: Appearance Care
READ NEXT:
Locks
Locks are lubricated at the factory.
Use a de-icing agent only when
absolutely necessary, and have the
locks greased after using. See
Recommended Fluids and
Lubricants
Washing the Vehicle
To pr
Use only lukewarm or cold water, a
soft cloth, and a car washing soap
to clean exterior lamps, lenses,
emblems, decals, and stripes.
Follow instructions under "Washing
the Vehicle" previously in this
SEE MORE:
Transfer case identification
Fig. 71: Transfer Case Primary Identification Label
The transfer case primary identification label (1) is located on the rear
extension housing. The transfer case
secondary identification stamping (2) is located on the bottom of the main
housing.
Transfer Case Primar
The inflatable restraint sensing and diagnostic module (SDM) must be
programmed with the proper calibration
software. The module stores and utilizes this information however if it is not
properly configured with the
correct calibration software, the SDM will not control all of the vehicle
feature