Buick Encore: Lighting Features
Entry Lighting
Some exterior lamps and interior
lamps turn on briefly at night, or in
areas with limited lighting, when .gif)
is pressed on the Remote Keyless
Entry (RKE) transmitter. When a
door is opened, the interior lamps
come on. They stay on for about
20 seconds. When all of the doors
have been closed or the ignition is
turned on, they gradually fade out.
This feature can be changed. See "Vehicle Locator Lights" under Vehicle Personalization
Exit Lighting
Some exterior lamps and interior lights come on at night, or in areas with limited lighting, when the driver door is opened after the ignition is turned off. The interior lamps come on after the ignition is turned off.
The exterior lamps and interior lamps remain on for a set amount of time, then automatically turn off.
The exterior lamps turn off immediately by turning the exterior lamp control off.
This feature can be changed. See Vehicle Personalization
Battery Power Protection
The battery saver feature protects against draining the vehicle's battery.
If some interior lamps or the manual parking lamps or headlamps are left on and the ignition is turned off, the battery rundown protection system automatically turns the lamp off after some time.
To restart the 10-minute timer, turn
the exterior lamp control to the .gif)
position and then back to the .gif)
or
.gif)
position. To keep the lamps on
for more than 10 minutes, the
ignition must be on or in ACC/
ACCESSORY.
Exterior Lighting Battery Saver
The exterior lamps turn off about
10 minutes after the ignition is
turned off, if the parking lamps or
headlamps have been manually left
on. This protects against draining
the battery. To restart the 10-minute
timer, turn the exterior lamp control
to the .gif)
position and then back
to
the or
position.
To keep the lamps on for more than 10 minutes, the ignition must be on or in ACC/ACCESSORY.
Infotainment System
Infotainment
See the infotainment manual for information on the radio, audio players, phone, navigation system, and voice or speech recognition.
It also includes information on settings.
Active Noise Cancellation (ANC)
If equipped, ANC reduces engine noise in the vehicle's interior. ANC requires the factory-installed audio system, radio, speakers, amplifier (if equipped), induction system, and exhaust system to work properly.
Deactivation is required by your dealer if related aftermarket equipment is installed.
READ NEXT:
Climate Control Systems
The heating, cooling, defrosting, and ventilation for the vehicle can be
controlled with this system.
Temperature Control
Air Delivery Modes
Fan Control
Defrost
Rear Window Defogger
Air
Dual Automatic Climate Control System
The heating, cooling, and ventilation for the vehicle can be controlled with
this system.
Driver and Passenger Heated
Seats (If Equipped)
Driver and Passenger
Temperature Controls
Air Delivery
SEE MORE:
Engine controls and fuel - 1.4l - Repair instructions
Brake pedal position sensor learn
Calibration Criteria
NOTE:
Do not apply the brake pedal during the brake pedal position sensor
calibration
procedure. Any movement of the brake pedal during this procedure will cause
the calibration procedure to fail. If this occurs, the brake pedal position
senso
Oil pump
NOTE:
Examples used in this article are general in nature and do not necessarily
relate
to a specific engine or system. Illustrations and procedures have been chosen
to guide mechanic through engine overhaul process. Descriptions of processes
of cleaning, inspection, assembly and machine shop pract
