Buick Encore Owners & Service Manuals

Buick Encore: Parking over Things That Burn

Warning

Things that can burn could touch hot exhaust parts under the vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.

Extended Parking

It is best not to park with the vehicle running. If the vehicle is left running, be sure it will not move and there is adequate ventilation.

See Shifting Into Park and Engine Exhaust

If the vehicle is left parked and running with the RKE transmitter outside the vehicle, it will continue to run for up to half an hour.

If the vehicle is left parked and running with the RKE transmitter inside the vehicle, it will continue to run for up to an hour.

The vehicle could turn off sooner if it is parked on a hill, due to lack of available fuel.

The timer will reset if the vehicle is taken out of P (Park) while it is running.

    READ NEXT:

     Engine Exhaust

    Warning Engine exhaust contains carbon monoxide (CO), which cannot be seen or smelled. Exposure to CO can cause unconsciousness and even death. Exhaust may enter the vehicle if: The vehicle idles i

     Automatic Transmission

    The selected gear is also shown in the instrument cluster. P : This position locks the drive wheels. Use P (Park) when starting the engine because the vehicle cannot move easily. Warning It is dang

     Brakes

    SEE MORE:

     Is a lab scope necessary?

    Use the Right Noid Light INTRODUCTION You probably have several tools at your disposal to diagnose injector circuits. But you might have questioned "Is a lab scope necessary to do a thorough job, or will a set of noid lights and a multifunction DVOM do just as well?" In the following text, we are

     Fixed and Moveable Windows - Description and operation

    Full-cut method description NOTE: If corrosion of the pinch-weld flange is present, or if sheet metal repairs or replacements are required, refinish the pinch-weld flange in order to present a clean, primer-only surface. If paint repairs are required, mask the flange bonding area, prior to a

    © 2020-2026 Copyright www.bencore2.com