Buick Encore: Navigation
Navigation requires a specific OnStar or connected service plan.
Press .gif)
to receive Turn-by-Turn
directions or have them sent to the
vehicle's navigation screen,
if equipped.
Turn-by-Turn Navigation
- Press
.gif)
to connect to an
Advisor. - Request directions to be downloaded to the vehicle.
- Follow the voice-guided commands.
Using Voice Commands During a Planned Route
Functionality of the Voice Command
button, if equipped, may vary by
vehicle and region. For some
vehicles, press .gif)
to open the
OnStar app on the infotainment
display. For other vehicles press .gif)
as follows.
Cancel Route
- Press
.gif)
. System responds:
"OnStar ready," then a tone. - Say "Cancel route." System responds: "Do you want to cancel directions?"
- Say "Yes." System responds: "OK, request completed, thank you, goodbye."
Route Preview
- Press
.gif)
. System responds:
"OnStar ready," then a tone. - Say "Route preview." System responds with the next three maneuvers.
Repeat
- Press
.gif)
. System responds:
"OnStar ready," then a tone. - Say "Repeat." System responds with the last direction given, then responds with "OnStar ready," then a tone.
Get My Destination
- Press
.gif)
. System responds:
"OnStar ready," then a tone. - Say "Get my destination." System responds with the address and distance to the destination, then responds with "OnStar ready," then a tone.
Send Destination to Vehicle
Directions can be sent to the vehicle's navigation screen, if equipped.
Press .gif)
, then ask the Advisor to
download directions to the vehicle's
navigation system, if equipped. After
the call ends, the navigation screen
will provide prompts to begin driving
directions. Routes that are sent to
the navigation screen can only be
canceled through the navigation
system.
READ NEXT:
Connections
The following services help with
staying connected.
Ensuring Security
Change the default passwords
for the Wi-Fi hotspot and
myBuick mobile application.
Make these passwords different
from each
Buick Encore 2012-2019 Service Manual
h1 {color: red;}
h2 {color: green;}
h3 {color: blue;}
h4 {color: #FF00FF;}
SEE MORE:
Engine Heater
Vehicles may have an engine
heater. The engine heater can help
in cold weather conditions at or
below −18 ºC (0 ºF) for easier
starting and better fuel economy
during engine warm-up. Plug in the
heater at least four hours before
starting the vehicle. An internal
thermostat in the plug end of the
Repair instructions
CLUTCH PEDAL REPLACEMENT
NOTE: The clutch pedal is part of the brake, accelerator, and
clutch pedal assembly
and cannot be serviced separately.
To replace the brake, accelerator and clutch pedal assembly, refer to Brake,
Accelerator, and Clutch Pedal
Replacement .
CLUTCH MASTER CYLINDER RESERVOIR
