Buick Encore Owners & Service Manuals

Buick Encore: Schematic wiring diagrams

DATA COMMUNICATION WIRING SCHEMATICS (ENCORE)

Power, Ground, and Low Speed GMLAN

Fig. 1: Power, Ground, and Low Speed GMLAN
Fig. 1: Power, Ground, and Low Speed GMLAN

High Speed GMLAN Bus (1 of 2)

Fig. 2: High Speed GMLAN Bus (1 of 2)
Fig. 2: High Speed GMLAN Bus (1 of 2)

High Speed GMLAN Bus (2 of 2)

Fig. 3: High Speed GMLAN Bus (2 of 2)
Fig. 3: High Speed GMLAN Bus (2 of 2)

High Speed GMLAN Bus 2

Fig. 4: High Speed GMLAN Bus 2
Fig. 4: High Speed GMLAN Bus 2

Communication Enable

Fig. 5: Communication Enable
Fig. 5: Communication Enable

Linear Interconnect Network (LIN)

Fig. 6: Linear Interconnect Network (LIN)
Fig. 6: Linear Interconnect Network (LIN)

DATA COMMUNICATION WIRING SCHEMATICS (Encore)

Power, Ground, and Low Speed GMLAN

Fig. 7: Power, Ground, and Low Speed GMLAN
Fig. 7: Power, Ground, and Low Speed GMLAN

High Speed GMLAN Bus (1 of 2)

Fig. 8: High Speed GMLAN Bus (1 of 2)
Fig. 8: High Speed GMLAN Bus (1 of 2)

High Speed GMLAN Bus (2 of 2)

Fig. 9: High Speed GMLAN Bus (2 of 2)
Fig. 9: High Speed GMLAN Bus (2 of 2)

High Speed GMLAN Bus 2

Fig. 10: High Speed GMLAN Bus 2
Fig. 10: High Speed GMLAN Bus 2

Linear Interconnect Network (LIN)

Fig. 11: Linear Interconnect Network (LIN)
Fig. 11: Linear Interconnect Network (LIN)

Communication Enable

Fig. 12: Communication Enable
Fig. 12: Communication Enable

BODY CONTROL SYSTEM WIRING SCHEMATICS (ENCORE)

Power, Ground, Data Communications and Subsystem References (1 of 4)

Fig. 13: Power, Ground, Data Communications and Subsystem References (1 of 4)
Fig. 13: Power, Ground, Data Communications and Subsystem References (1 of 4)

Subsystem References (2 of 4)

Fig. 14: Subsystem References (2 of 4)
Fig. 14: Subsystem References (2 of 4)

Subsystem References (3 of 4)

Fig. 15: Subsystem References (3 of 4)
Fig. 15: Subsystem References (3 of 4)

Subsystem References (4 of 4)

Fig. 16: Subsystem References (4 of 4)
Fig. 16: Subsystem References (4 of 4)

BODY CONTROL SYSTEM WIRING SCHEMATICS (Encore)

Power, Ground, Data Communications and Subsystem References (1 of 4)

Fig. 17: Power, Ground, Data Communications and Subsystem References (1 of 4)
Fig. 17: Power, Ground, Data Communications and Subsystem References (1 of 4)

Subsystem References (2 of 4)

Fig. 18: Subsystem References (2 of 4)
Fig. 18: Subsystem References (2 of 4)

Subsystem References (3 of 4)

Fig. 19: Subsystem References (3 of 4)
Fig. 19: Subsystem References (3 of 4)

Subsystem References (4 of 4)

Fig. 20: Subsystem References (4 of 4)
Fig. 20: Subsystem References (4 of 4)

    READ NEXT:

     Data Communications - Diagnostic information and procedures

    DIAGNOSTIC CODE INDEX CONTROL MODULE U CODE LIST This list includes all Data Communications related U-code DTCs in alphanumeric order with descriptors for all devices. Not all DTCs listed will be

     Data communications - Description and operation

    BODY CONTROL SYSTEM DESCRIPTION AND OPERATION The body control system consists of the body control module (BCM), communications, and various input and outputs. Some inputs, outputs and messages requi

     Floor Coverings and Headlinings

    SEE MORE:

     Vibration analysis - road testing (EL-38792-A ELECTRONIC VIBRATION ANALYZER)

    Test Description The numbers below refer to the step numbers on the diagnostic table. 5 Obtaining rotational speed for the components rotating at tire/wheel speed is critical to systematically eliminating specific vehicle component groups. These component rotational speeds can be generated by usin

     Diagnostic system check instructions

    The following is an overview of instructions for the general information and 13 step System Verification included in the Diagnostic System Check - Vehicle procedure. Diagnostic Instructions A link to Strategy Based Diagnosis is provided as an overview on how a technician should diagnose a vehicle.

    © 2020-2025 Copyright www.bencore2.com