Buick Encore: Waterleaks
READ NEXT:
Diagnostic information and procedures
WATERLEAK TEST PREPARATION
GM vehicles are designed to operate under normal environmental
conditions.
The design criteria for sealing materials and components takes into
consideration the seali
Repair instructions
BODY WATERLEAK REPAIR
Fig. 6: Cutting Out A Portion Of The Adhesive Caulking (1 Of 2)
WARNING: If the vehicle interior is exposed to moisture and becomes
soaked up to
the level of the sensing and d
Anti-Lock Brake Safety Precautions
PLEASE READ THIS FIRST *
This article is intended for general information purposes only. This
information may not apply to all makes and
models. If vehicle is equipped with Anti-Lock Brake System (AB
SEE MORE:
Turbocharger replacement
Turbocharger replacement - Removal Procedure
Special Tools
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection .
Drain the cooling system. Refer to Coolin
Brake Fluid
The brake master cylinder
reservoir
is filled with GM approved DOT 4
brake fluid as indicated on the
reservoir cap. See Engine
Compartment Overview for
the location of the reservoir.
Checking Brake Fluid
With the vehicle in P (Park) on a
level surface, the brake fluid level
should be between the mi
© 2020-2026 Copyright www.bencore2.com
