Buick Encore: Wheel Alignment System
READ NEXT:
SPECIFICATIONS
WHEEL ALIGNMENT SPECIFICATIONS
Wheel Alignment Specifications
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
WHEEL ALIGNMENT MEASUREMENT
S
Camber description
Fig. 3: Illustrating Camber Angle
Camber is the tilting of the wheels from the vertical when viewed from the
front of the vehicle. When the
wheels tilt outward at the top, the ca
SEE MORE:
IMPORTANT: The following steps must be completed before
using the symptom tables.
Perform the Diagnostic System Check - Vehicle before using the Symptom
Tables in order to verify that
all of the following are true:
There are no DTCs set.
The control modules can communicate via the serial d
Lower anchors (1) are metal bars
built into the vehicle. There are two
lower anchors for each LATCH
seating position that will
accommodate a child restraint with
lower attachments (2).
Top Tether Anchor
A top tether (3, 4) is used to secure
the top of the child restraint to the
vehicle. A top te