Buick Encore: Interior Lighting
Instrument Panel Illumination Control
.gif)
The brightness of the instrument cluster display, infotainment display and controls, steering wheel controls, and all other illuminated controls, as well as feature status indicators can be adjusted.
The knob for this feature is on the instrument panel beside the steering column.
Push the knob in all the way until it extends out and then turn the knob clockwise or counterclockwise to brighten or dim the lights.
Courtesy Lamps
The courtesy lamps come on automatically when any door is opened and the dome lamp is in the door position
Dome Lamps
Front and Rear Dome Lamps
.gif)
The front dome lamp controls are in the overhead console.
.gif)
: Press to turn the lamps off,
even when a door is open.
.gif)
: When the button is returned to
the middle position, the lamps turn
on automatically when a door is
opened.
.gif)
: Press to turn on the dome
lamps.
.gif)
The rear dome lamp controls are in the headliner above the rear seats.
.gif)
: Press to turn the lamps
off,
even when a door is open.
.gif)
: When the button is returned to
the middle position, the lamps turn
on automatically when a door is
opened.
.gif)
: Press to turn on the
dome lamps.
Reading Lamps
.gif)
The front reading lamps are in the overhead console.
.gif)
or
.gif)
: Press to turn each lamp
on or off.
READ NEXT:
Lighting Features
Entry Lighting
Some exterior lamps and interior
lamps turn on briefly at night, or in
areas with limited lighting, when
is pressed on the Remote Keyless
Entry (RKE) transmitter. When a
door is opened
Climate Control Systems
The heating, cooling, defrosting, and ventilation for the vehicle can be
controlled with this system.
Temperature Control
Air Delivery Modes
Fan Control
Defrost
Rear Window Defogger
Air
SEE MORE:
Electronic brake control module programming and setup
NOTE:
DO NOT program a control module unless directed to by a service
procedure or a service bulletin. If the control module is not properly
configured with the correct calibration software, the control module will
not control all of the vehicle features properly.
Ensure the programming tool i
Diagnostic information and procedures
DTC P0601, P0603, P0604, OR P062F: Control module memory
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an o
